|
|
FIELDVUE
Digital Valve Controllers - HART
Communication Protocol -
DVC6000
|
The FIELDVUE®
DVC6000 series digital valve controller
is a communicating, microprocessor-based current-to-pneumatic
instrument. The controllers can be used on single- or double-acting
actuators. The digital valve controller receives feedback of the
valve travel position plus supply and actuator pneumatic pressure.
This allows the instrument to diagnose not only itself, but also the
valve and actuator to which it is mounted. This provides you with
very cost effective maintenance information, so that required
maintenance can be performed on the instrument and valve when there
really is a need. Additional Product Information
Additional
Web Information
Return to Top |
FIELDVUE
Digital Valve Controllers - HART
Communication Protocol -
DVC6000 Safety
Instrumented System Protocol
|
The FIELDVUE® DVC6000 SIS digital valve
controller is a communicating, microprocessor-based digital-to
pneumatic valve-mounted instrument. The controller can be used on
single- or double-acting actuators. Safety Instrumented Systems
(SIS) are specifically designed to reduce the likelihood, or the
severity of the impact of an identified event, thus helping to
protect personnel, equipment, and the environment. These systems
involve final control elements, which are mostly in one position and
are requested to move only when an emergency situations arises.
Typical applications with Safety Instrumented Systems involve
Emergency Shutdown Valves, Emergency Blow Down Valves, Emergency
Venting Valves, Emergency Isolation Valves, Critical On-Off Valves,
etc. Additional Product Information
Additional
Web Information
Return to Top |
FIELDVUE
Digital Valve Controllers - FOUNDATION
fieldbus Communication Protocol -
DVC6000f
|
The FIELDVUE® DVC6000f
series digital valve controller is a communicating, microprocessor-based
digital-to-pneumatic valve-mounted instrument. The
controller can be used on single- or double-acting actuators and uses FOUNDATION fieldbus communications protocol for easy access to
information critical to the process operation. The digital valve
controller receives feedback of the valve travel position plus
supply and actuator pneumatic pressure. This allows the instrument
to diagnose not only itself, but also the valve and actuator to
which it is mounted. This provides you with very cost effective
maintenance information, so that required maintenance can be
performed on the instrument and valve when there really is a
need.
Additional Product Information
Additional
Web Information
Return to Top |
FIELDVUE
Digital Valve Controllers - HART Communication Protocol -
DVC2000
|
The FIELDVUE® DVC2000 single-acting
digital valve controller is a communicating, microprocessor-based
digital-to-pneumatic valve-mounted instrument. With pushbuttons and
a liquid crystal display, configuration and calibration can be
performed easily in any of its seven languages including English,
German, French, Spanish, Italian, Chinese and Japanese. The digital valve
controller receives feedback of the valve travel position plus
supply and actuator pneumatic pressure. This allows the instrument
to diagnose not only itself, but also the valve and actuator to
which it is mounted. This provides you with very cost effective
maintenance information, so that required maintenance can be
performed on the instrument and valve when there really is a
need.
Additional Product Information
Additional
Web Information
Return to Top |
Electro-Pneumatic - Used
with Sliding Stem Valves -
3582i
|
The Type 3582i electro-pneumatic,
single-acting
positioner is used with diaphragm-actuated, sliding-stem control
valve assemblies. The electro-pneumatic valve positioner receives an
electronic input signal from a control device and modulates the
supply pressure to the control valve actuator, providing an accurate
valve stem position that is proportional to the pneumatic input
signal received from a control device. Additional Product Information
Return to Top |
Electro-Pneumatic - Used
with Sliding Stem Valves -
3661
|
The Type 3661electro-pneumatic,
single-acting positioner is used with various actuators on
sliding-stem valves for throttling applications. This rugged
positioner provides a valve position proportional to a standard
milliampere dc input signal received from a control device. Additional Product Information
Return to Top |
Electro-Pneumatic - Used
with Rotary Valves -
3620J
|
The Type 3620J electro-pneumatic,
single-acting positioner
is used with rotary actuators to accurately position
control valves used in throttling applications. The positioner
mounts integrally to the actuator housing. These rugged positioners
provide a valve position proportional to a pneumatic input signal. Additional Product Information
Return to Top |
Electro-Pneumatic - Used
with Rotary Valves -
3620JP
|
The Type 3620JP electro-pneumatic,
double-acting positioner is used with rotary actuators to
accurately position control valves used in throttling applications.
The positioner mounts integrally to the actuator housing. These
rugged positioners provide a valve position proportional to a dc
current input signal. Additional Product Information
Return to Top |
Pneumatic
- Used
with Sliding Stem Valves -
3582
|
The Type 3582 pneumatic,
single-acting positioner is used with diaphragm-actuated, sliding-stem control
valve assemblies. The pneumatic valve positioner receives a
pneumatic input signal from a control device and modulates the
supply pressure to the control valve actuator, providing an accurate
valve stem position that is proportional to the pneumatic input
signal.
Additional Product Information
Return to Top |
Pneumatic - Used
with Sliding Stem Valves -
3660
|
The Type 3660 pneumatic,
single-acting
positioner is used with
various actuators on sliding-stem valves for throttling
applications. This rugged positioner provides a valve position
proportional to a pneumatic input signal received from a control
device.
Additional Product Information
Return to Top |
Pneumatic - Used
with Rotary Valves -
3610J
|
The Type 3610J pneumatic,
single-acting positioner
is used with rotary actuators to accurately position
control valves used in throttling applications. The positioner
mounts integrally to the actuator housing. These rugged positioners
provide a valve position proportional to a pneumatic input signal.
Additional Product Information
Return to Top |
Pneumatic - Used
with Rotary Valves -
3610JP
|
The Type 3610JP pneumatic,
double-acting positioner is used with rotary actuators to
accurately position control valves used in throttling applications.
The positioner mounts integrally to the actuator housing. These
rugged positioners provide a valve position proportional to a dc
current input signal.
Additional Product Information
Return to Top |
|
